Take back control of your maps

Manually building a tile server (Ubuntu 22.04)

This page describes how to install, setup and configure all the necessary software to operate your own tile server. These step-by-step instructions were written for Ubuntu Linux 22.04 (Jammy Jellyfish), and were tested in April 2022.

Software installation

The OSM tile server stack is a collection of programs and libraries that work together to create a tile server. As so often with OpenStreetMap, there are many ways to achieve this goal and nearly all of the components have alternatives that have various specific advantages and disadvantages. This tutorial describes the most standard version that is similar to that used on the main OpenStreetMap.org tile servers.

It consists of 5 main components: mod_tile, renderd, mapnik, osm2pgsql and a postgresql/postgis database. Mod_tile is an apache module that serves cached tiles and decides which tiles need re-rendering - either because they are not yet cached or because they are outdated. Renderd provides a priority queueing system for different sorts of requests to manage and smooth out the load from rendering requests. Mapnik is the software library that does the actual rendering and is used by renderd.

Thanks to the work done by the Debian and Ubuntu maintainers to incorporate the latest versions of these packages into Ubuntu 22.04, these instructions are somewhat shorter than previous versions.

These instructions are have been written and tested against a newly-installed Ubuntu 22.04 server. If you have got other versions of some software already installed (perhaps you upgraded from an earlier version, or you set up some PPAs to load from) then you may need to make some adjustments.

In order to build these components, a variety of dependencies need to be installed first.

This guide assumes that you run everything from a non-root user via “sudo”. Don’t try and do everything below as root; it won’t work.

sudo apt update
sudo apt upgrade
sudo apt install screen locate libapache2-mod-tile renderd git tar unzip wget bzip2 apache2 lua5.1 mapnik-utils python3-mapnik python3-psycopg2 python3-yaml gdal-bin npm postgresql postgresql-contrib postgis postgresql-14-postgis-3 postgresql-14-postgis-3-scripts osm2pgsql net-tools curl

At this point, a couple of new accounts have been added. You can see them with “tail /etc/passwd”. “postgres” is used for managing the databases that we use to hold data for rendering. “_renderd” is used for the renderd daemon, and we’ll need to make sure lots of the commands below are run as that user.

Now you need to create a postgis database. The defaults of various programs assume the database is called gis and we will use the same convention in this tutorial, although this is not necessary. Note that “_renderd” below matches the user that the renderd daemon will run from.

sudo -u postgres -i
createuser _renderd
createdb -E UTF8 -O _renderd gis

While still working as the “postgres” user, set up PostGIS on the PostgreSQL database:


(that’ll put you at a “postgres=#” prompt)

\c gis

(it’ll answer “You are now connected to database ‘gis’ as user ‘postgres’”.)


(it’ll answer CREATE EXTENSION)


(it’ll answer CREATE EXTENSION)

ALTER TABLE geometry_columns OWNER TO _renderd;

(it’ll answer ALTER TABLE)

ALTER TABLE spatial_ref_sys OWNER TO _renderd;

(it’ll answer ALTER TABLE)


(it’ll exit psql and go back to a normal Linux prompt)


(to exit back to be the user that we were before we did “sudo -u postgres -i” above)


Mapnik was installed above. We’ll check that it has been installed correctly by doing this:

>>> import mapnik

If python replies with the second chevron prompt »> and without errors, then Mapnik library was found by Python. Congratulations! You can leave Python with this command:

>>> quit()

Stylesheet configuration

Now that all of the necessary software is installed, you will need to download and configure a stylesheet.

The style we’ll use here is the one that use by the “standard” map on the openstreetmap.org website. It’s chosen because it’s well documented, and should work anywhere in the world (including in places with non-latin placenames). There are a couple of downsides though - it’s very much a compromise designed to work globally, and it’s quite complicated to understand and modify, should you need to do that.

The home of “OpenStreetMap Carto” on the web is https://github.com/gravitystorm/openstreetmap-carto/ and it has it’s own installation instructions at https://github.com/gravitystorm/openstreetmap-carto/blob/master/INSTALL.md , although we’ll cover everything that needs to be done here.

Here we’re assuming that we’re storing the stylesheet details in a directory below “src” below the home directory of whichever non-root user account you are using; we’ll change access so that the “_renderd” user can access it below.

mkdir ~/src
cd ~/src
git clone https://github.com/gravitystorm/openstreetmap-carto
cd openstreetmap-carto

Next, we’ll install a suitable version of the “carto” compiler.

sudo npm install -g carto
carto -v

That should respond with a number that is at least as high as:


Then we convert the carto project into something that Mapnik can understand:

carto project.mml > mapnik.xml

You now have a Mapnik XML stylesheet at /home/youruseraccount/src/openstreetmap-carto/mapnik.xml .

Loading data

Initially, we’ll load only a small amount of test data. Other download locations are available, but “download.geofabrik.de” has a wide range of options. In this example we’ll download the data for Azerbaijan, which is currently about 32Mb.

Browse to https://download.geofabrik.de/asia/azerbaijan.html and note the “This file was last modified” date (e.g. “2022-04-22T20:21:40Z”). We’ll need that later if we want to update the database with people’s subsequent changes to OpenStreetMap. Download it as follows:

mkdir ~/data
cd ~/data
wget https://download.geofabrik.de/asia/azerbaijan-latest.osm.pbf

Next, we need to make sure that the “_renderd” user can access the stylesheet. In order to do this it needs access to wherever you downloaded it, and by default it won’t have access to your home directory. If it’s in “src” below your user account then

chmod o+rx ~

will work. If you don’t want to do this you can move it and amend references to the file locations in subsequent commands.

The following command will insert the OpenStreetMap data you downloaded earlier into the database. This step is very disk I/O intensive; importing the full planet might take many hours, days or weeks depending on the hardware. For smaller extracts the import time is much faster accordingly, and you may need to experiment with different -C values to fit within your machine’s available memory. Note that the “_renderd” user is used for this process.

sudo -u _renderd osm2pgsql -d gis --create --slim  -G --hstore --tag-transform-script ~/src/openstreetmap-carto/openstreetmap-carto.lua -C 2500 --number-processes 1 -S ~/src/openstreetmap-carto/openstreetmap-carto.style ~/data/azerbaijan-latest.osm.pbf

It’s worth explaining a little bit about what those options mean:

-d gis

The database to work with (“gis” used to be the default; now it must be specified).


Load data into an empty database rather than trying to append to an existing one.


osm2pgsql can use different table layouts; “slim” tables works for rendering.


Determines how multipolygons are processed.


Allows tags for which there are no explicit database columns to be used for rendering.


Defines the lua script used for tag processing. This an easy is a way to process OSM tags before the style itself processes them, making the style logic potentially much simpler.

-C 2500

Allocate 2.5 Gb of memory to osm2pgsql to the import process. If you have less memory you could try a smaller number, and if the import process is killed because it runs out of memory you’ll need to try a smaller number or a smaller OSM extract..

--number-processes 1

Use 1 CPU. If you have more cores available you can use more.


Create the database columns in this file (actually these are unchanged from “openstreetmap-carto”)

The final argument is the data file to load.

That command will complete with something like “osm2pgsql took 163s (2m 43s) overall”.

Creating indexes

Since version v5.3.0, some extra indexes now need to be applied manually:

cd ~/src/openstreetmap-carto/
sudo -u _renderd psql -d gis -f indexes.sql

It should respond with “CREATE INDEX” 14 times.

Shapefile download

Although most of the data used to create the map is directly from the OpenStreetMap data file that you downloaded above, some shapefiles for things like low-zoom country boundaries are still needed. To download and index these, using the same account as we used previously:

cd ~/src/openstreetmap-carto/
mkdir data
sudo chown _renderd data
sudo -u _renderd scripts/get-external-data.py

This process involves a sizable download and may take some time - not much will appear on the screen when it is running. Some data will go directly into the database, and some will go into a “data” directory below “openstreetmap-carto”. If there is a problem here then the Natural Earth data may have moved - look at this issue and other issues at Natural Earth for more details. If you need to change the Natural Earth download location your copy of this file is the one to edit.


In version v5.6.0 and above of Carto, fonts need to be installed manually:

cd ~/src/openstreetmap-carto/

Our test data area (Azerbaijan) was chosen both because it was a small area and because some place names in that region have names containing non-latin characters.

Setting up your webserver

Configure renderd

The config file for “renderd” on Ubuntu 22.04 is “/etc/renderd.conf”. Edit that with a text editor such as nano:

sudo nano /etc/renderd.conf

Add a section like the following at the end:


The location of the XML file “/home/accountname/src/openstreetmap-carto/mapnik.xml” will need to be changed to the actual location on your system. You can change “[s2o]” and “URI=/hot/” as well if you like. If you want to render more than one set of tiles from one server you can - just add another section like “[s2o]” with a different name referring to a different map style. If you want it to refer to a different database to the default “gis” you can, but that’s out of the scope of this document. If you’ve only got 2Gb or so of memory you’ll also want to reduce “num_threads” to 2. “URI=/hot/” was chosen so that the tiles generated here can more easily be used in place of the HOT tile layer at OpenStreetMap.org. You can use something else here, but “/hot/” is as good as anything.

When this guide was first written, the version of Mapnik provided by Ubuntu 22.04 was 3.1, and the “plugins_dir” setting in the “[mapnik]” part of the file was “/usr/lib/mapnik/3.1/input”. That “3.1” may change again in the future. If an error occurs when trying to render tiles such as this:

An error occurred while loading the map layer 's2o': Could not create datasource for type: 'postgis' (no datasource plugin directories have been successfully registered)  encountered during parsing of layer 'landcover-low-zoom'

then look in “/usr/lib/mapnik” and see what version directories there are, and also look in “/usr/lib/mapnik/(version)/input” to make sure that a file “postgis.input” exists there.

Making sure that you can see debug messages

It’d be really useful at this point to be able to see the output from the tile rendering process, including any errors. By default with recent mod_tile versions, this is turned off. To turn it on:

sudo nano /usr/lib/systemd/system/renderd.service

If it is not there already, add:


after “[Service]”. Then:

sudo systemctl daemon-reload
sudo systemctl restart renderd
sudo systemctl restart apache2

Configuring Apache

If you look at /var/log/syslog, you should see messages from the “renderd” service. There will initially be some font warnings - don’t worry about those for now. Next:

sudo /etc/init.d/apache2 restart

In syslog you should see a message like:

Apr 23 11:14:10 servername apachectl[2031]: [Sat Apr 23 11:14:10.190678 2022] [tile:notice] [pid 2031:tid 140608477239168] Loading tile config s2o at /hot/ for zooms 0 - 20 from tile directory /var/cache/renderd/tiles with extension .png and mime type image/png

Next, point a web browser at “http://yourserveripaddress/index.html” (change yourserveripaddress to your actual server address). You should see “Apache2 Ubuntu Default Page”.

If you don’t know what IP address it will have been assigned you can likely use “ifconfig” to find out - if the network configuration is not too complicated it’ll probably be the “inet addr” that is not “”). If you’re using a server at a hosting provider then it’s likely that your server’s internal address will be different to the external address that has been allocated to you, but that external IP address will have already been sent to you and it’ll probably be the one that you’re accessing the server on currently.

Note that this is just the “http” (port 80) site - you’ll need to do a little bit more Apache configuration if you want to enable https, but that’s out of the scope of these instructions. However, if you use “Let’s Encrypt” to issue certificates then the process of setting that up can also configure the Apache HTTPS site as well.

Next, point a web browser at: http://yourserveripaddress/hot/0/0/0.png

You’ll need to edit that of course if you changed “URI=/hot/” above. You should see a small map of the world. If you don’t, investigate the errors that it displays. These will most likely be permissions errors or perhaps related to accidentally missing some steps from the instructions above. If you don’t get a tile and get other errors again save the full output in a pastebin and ask a question about the problem somewhere like help.openstreetmap.org.

Viewing tiles

In order to see tiles, we’ll cheat and use an html file “sample_leaflet.html” that allows you to view a very simple map. To obtain this:

cd /var/www/html
sudo wget https://raw.githubusercontent.com/SomeoneElseOSM/mod_tile/switch2osm/extra/sample_leaflet.html
sudo nano sample_leaflet.html

Edit so that the IP address matches yourserveraddress rather than just saying “”. That should allow you to access this server from others. Then browse to “http://yourserveraddress/sample_leaflet.html”.

The initial map display will take a little while. You’ll be able to zoom in and out, but depending on server speed some tiles may initially display as grey because they can’t be rendered in time for the browser. However, once done they’ll be ready for the next time that they are needed. If you look in /var/log/syslog you should see requests for tiles, so to see these as they are requested, from an ssh connection do:

tail -f /var/log/syslog | grep " TILE "

(note the spaces around “TILE” there)

That will show a line every time a tile is requested, and one every time rendering of one is completed.

If desired, you can increase the setting “ModTileMissingRequestTimeout” in “/etc/apache2/conf-available/renderd.conf” from 10 seconds to perhaps 30 or 60, in order to wait longer for tiles to be rendered in the background before a grey tile is given to the user. Make sure you “sudo service renderd restart” and “sudo service apache2 restart” after changing it.

Congratulations. Head over to the using tiles section to create a map that uses your new tile server.